2021
Nikolov, Daniel K.; Bauer, Aaron; Cheng, Fei; Kato, Hitoshi; Vamivakas, A. Nick; Rolland, Jannick P.
Metaform optics: Bridging nanophotonics and freeform optics Journal Article
In: Science Advances, vol. 7, no. 18, pp. eabe5112, 2021.
Abstract | Links | BibTeX | Tags: Aberration correction, augmented reality, CeFO manufacturing, CEFO metrology, freeform, head display, Image quality, Optical design, relay optics, rolland, tomography
@article{nokey,
title = {Metaform optics: Bridging nanophotonics and freeform optics},
author = {Daniel K. Nikolov and Aaron Bauer and Fei Cheng and Hitoshi Kato and A. Nick Vamivakas and Jannick P. Rolland},
url = {https://www.science.org/doi/abs/10.1126/sciadv.abe5112},
doi = {10.1126/sciadv.abe5112},
year = {2021},
date = {2021-04-30},
urldate = {2021-04-30},
journal = {Science Advances},
volume = {7},
number = {18},
pages = {eabe5112},
abstract = {The demand for high-resolution optical systems with a compact form factor, such as augmented reality displays, sensors, and mobile cameras, requires creating new optical component architectures. Advances in the design and fabrication of freeform optics and metasurfaces make them potential solutions to address the previous needs. Here, we introduce the concept of a metaform—an optical surface that integrates the combined benefits of a freeform optic and a metasurface into a single optical component. We experimentally realized a miniature imager using a metaform mirror. The mirror is fabricated via an enhanced electron beam lithography process on a freeform substrate. The design degrees of freedom enabled by a metaform will support a new generation of optical systems.},
keywords = {Aberration correction, augmented reality, CeFO manufacturing, CEFO metrology, freeform, head display, Image quality, Optical design, relay optics, rolland, tomography},
pubstate = {published},
tppubtype = {article}
}
2019
Aaron Bauer Nick Takaki,; Rolland, Jannick P.
On-the-fly surface manufacturability constraints for freeform optical design enabled by orthogonal polynomials Journal Article
In: Optics Express, vol. 27, no. 5, pp. 6129-6146, 2019.
Abstract | Links | BibTeX | Tags: Aberration correction, CeFO, Freeform surfaces, Image quality, Optical design, Optical surfaces, Optical systems
@article{Takaki_manufacturability,
title = {On-the-fly surface manufacturability constraints for freeform optical design enabled by orthogonal polynomials},
author = {Nick Takaki, Aaron Bauer, and Jannick P. Rolland},
editor = {James Leger, Ulrike Fuchs },
url = {https://doi.org/10.1364/OE.27.006129},
doi = {10.1364/OE.27.006129},
year = {2019},
date = {2019-02-20},
journal = {Optics Express},
volume = {27},
number = {5},
pages = {6129-6146},
abstract = {When leveraging orthogonal polynomials for describing freeform optics, designers typically focus on the computational efficiency of convergence and the optical performance of the resulting designs. However, to physically realize these designs, the freeform surfaces need to be fabricated and tested. An optimization constraint is described that allows on-the-fly calculation and constraint of manufacturability estimates for freeform surfaces, namely peak-to-valley sag departure and maximum gradient normal departure. This constraint’s construction is demonstrated in general for orthogonal polynomials, and in particular for both Zernike polynomials and Forbes 2D-Q polynomials. Lastly, this optimization constraint’s impact during design is shown via two design studies: a redesign of a published unobscured three-mirror telescope in the ball geometry for use in LWIR imaging and a freeform prism combiner for use in AR/VR applications. It is shown that using the optimization penalty with a fixed number of coefficients enables an improvement in manufacturability in exchange for a tradeoff in optical performance. It is further shown that, when the number of coefficients is increased in conjunction with the optimization penalty, manufacturability estimates can be improved without sacrificing optical performance.},
keywords = {Aberration correction, CeFO, Freeform surfaces, Image quality, Optical design, Optical surfaces, Optical systems},
pubstate = {published},
tppubtype = {article}
}